59
Adjusting Flavor Dispense Rate
To produce the best serving, the output must be
adjusted to the proper level. Each flavor is
formulated to dispense at a standard level 5
which is, generally speaking, the recommended
flavor level. However, differences in freezers,
consumer preferences, and product mix and
dispense flow rate will determine what level is
appropriate for your operation. Fortunately, the
TS 80FCB system is adjustable for both flow
and taste at any time.
1. From the main menu screen, press the
SETUP key in the upper left corner. Enter
the password if required.
2. Press the MAINTENANCE key.
3. Press the ADJUST DISPENSE RATE key.
4.
Use the “<” and “>”keys to scroll through the
flavor list in the first box and find a flavor
that need to be adjusted.
5.
Then, use the “<” and “>”keys to increase or
decrease the flow rate in the second box. A
higher number increases the amount of
flavor per serving.
NOTE:
THE STANDARD SETTING IS ‘5’,
HOWEVER THIS SHOULD BE ADJUSTED IF
NEEDED ACCORDING TO PRODUCT FLOW
RATE, SYRUP FLAVOR STRENGTH AND
PERSONAL PREFERENCE.
6. Repeat Steps 4 and 5 to adjust the levels
for other flavors.
7. Press the DONE key to return to the main
screen.
Summary of Contents for TS 80FCB
