21
21. The system is now in the Prime Syrup
function mode.
NOTE:
IF THE FLAVORS INSTALLED ARE
DIFFERENT THAN THE FLAVORS SHOWN
ON THE MENU, YOU WILL NEED TO
CHANGE THE TOUCHSCREEN MENU LABEL
FOR THAT SYRUP LINE. SEE THE
“TOUCHSCREEN OPERATIONS –
ASSIGNING FLAVORS TO THE MENU” FOR
INSTRUCTIONS.
NOTE:
INJECTOR FLUSH KEY IS INTENDED
FOR USE WITH NON-FCB SYSTEMS.
DO
NOT PRESS INJECTOR FLUSH
, AS AIR
AND/OR PRODUCT WILL DISPENSE FROM
THE SPOUT FOR SEVERAL SECONDS AND
SERVES NO SPECIFIC PURPOSE WITH THE
FCB SYSTEM.
22. To prime the syrup line, place a container
under the spout. Press the key of the first
flavor and allow the syrup to flow to flush
out the sanitizer solution and any air
pockets.
23. Once syrup flows consistently from the
spout, press the flavor key again to
complete the procedure.
24. Repeat Steps 22-23 for each syrup line to
be primed.
25. When all the syrup lines with replaced
flavors have been primed, draw a small
serving to clear the spout of flavor.
26. Press DONE to exit the Prime Syrup Pump
mode and return to the main screen.
Summary of Contents for TS 80FCB
