27
6.5 Setting Screen
The functions can be turned on or off on the setting screen.
·
·
·
·
·
·
·
[Extruder Type]: The selection of the extruder type is related to the setting of the
filament feeding and printing temperature, so be sure to select the extruder that
matches the equipment installation.
[Filament Check]: When the filament detection function is turned on, the
equipment will stop printing when the filament runs out in the middle of
printing.
[Auto Shut Down]: When the automatic shutdown function is turned on, the
equipment will automatically shut down after finishing the model printing.
[Power Off Continue]: When the resuming printing after recovering from power
failure function is turned on, if the power is suddenly off during printing, the
equipment will automatically store the current printing position data, and
continue the printing of the current model after the power supply is recovered.
[Air Filter]: When the air filtration function is turned on, the fan on the back of the
equipment starts; The front of the fan is equipped with HEPA filter cotton and
activated carbon filter cotton, which can filter the dust and peculiar smell
produced during printing.
[Box Heat Preservation]: When the chamber insulation function is turned on, the
temperature insulation time before and after printing can be set. Due to the
characteristics of some materials, it is necessary to maintain the thermal
balance before and after printing.
[Pl-Heat Preservation]: When the platform insulation function is turned on, the
platform insulation time before and after printing can be set. When in the
transition state of removing the model, avoid increasing the time of reheating
when the temperature drops. When this function is turned on, the platform
remains the heating state when the model is removed after printing. Please pay
attention to the high temperature and avoid burns.
