17
5.Equipment Configuration and Operation
5.1 Normal Mode
When the equipment uses a single extruder to print, set in the normal mode in the
slicing software; The right extruder printing model is preferred by default. Users
can also select suitable extruders to print according to actual needs. The model
can be modified by moving, rotating and scaling. Click the [Start Slicing], select the
corresponding printing material, and click the [Slice] and the sliced file can be
generated.
5.2 Dual-extruder Printing Mode
When printing dual-color/dual-filament models in the dual-extruder printing
mode, please make sure that the nozzles are in contact with the anti-oozing plate,
which will prevent the nozzles from oozing during the printing process;
When printing single-color models, a single extruder is automatically used as the
printing extruder by default if the user has not set the dual-extruder printing mode
in advance.
