02
NOTICE
Safety notice: Please strictly follow all the safety
warnings and notices below all the time.
WORK ENVIRONMENT SAFETY
Please keep the work table of the equipment clean and tidy.
Please ensure that the equipment is away from combustible gases, liquids and
dust when working. (The high temperature generated by the equipment operation
may react with combustible gases, liquids, and airborne dust, thus causing fire)
Children and untrained personnel are not allowed to operate the equipment
alone.
ELECTRICAL SAFETY
Be sure to ground the equipment. Do not modify the plug of the equipment.
Ungrounded equipment/improperly grounded equipment/modified plug will
inevitably increase the risk of electric leakage.
Do not expose the equipment to damp or hot-sun environment. (Humidity will
increase the risk of electric leakage.Exposure to sunlight will accelerate the aging
of plastic parts)
Make sure to only use the power cord provided by Flashforge.
Do not use the equipment during an thunderstorm.
Please shut down the equipment and unplug it if it is not in use for a long time.
PERSONAL SAFETY
Do not touch the extruder and build plate, etc during printing.
Do not touch the extruder and build plate when finishing printing in order to avoid
high temperature burns or mechanical damage.
Do not wear scarves, masks, gloves, jewelry ornaments or other objects that can
easily get caught in the equipment when operating it.
Do not operate the equipment while you are tired or under the influence of drugs,
alcohol or medication.
Note: Every 3D printer has undergone printing tests before leaving the factory. If
there are some residues in the extruder of the equipment or some slight
scratches on the build plate, it is normal and will not affect its use.
