19
2.6
Multi-function Mode
While the test wire B is connected to the motor handpiece, the device
enters the Multi-function Mode automatically.
Please refer to Fig. C, D, F.
2.6.1
Connect the Components
a)
Connect lip hook
b)
Connect test wire B
c)
Connect contra angle and file.
d)
Connect contra angle holder/lighting device
CAUTION:
•
Do not bang or bump the plugs when they are inserted.
•
Make sure the plug is all the way in. Otherwise canal measurements
cannot be made.
•
Do not wind the probe cord around the device.
•
Always clip the electrode on the file when using it. Otherwise,
measurements may not be accurate or rotation may not be properly
controlled. (It may not be possible to measure a canal if blood or some
other liquid overflows the canal or if the canal is completely blocked.)
