27
5.3
Replacement Battery
Please refer to Fig. H
Replace the battery if it seems to be running out of power sooner than it
should.
a)
Turn the power off
b)
Use tweezers to open the rubber cover and then remove the screw.
c)
Remove the battery cover as shown in the illustration.
d)
Remove the old battery and disconnect the connector.
e)
Connect the new battery and put it in the motor handpiece.
f)
Install the cover and its screw.
CAUTION:
•
Use only battery designed for the motor handpiece. Other batteries could
cause overheating.
•
Do not use a battery if it is leaking, deformed, discolored or if its label is
peeled off. It might overheat.
NOTE:
•
Do not leave the power on when disconnecting the battery.
•
Open the rubber cover carefully. Don’t pull too hard. It might come off
the motor handpiece.
•
Do not remove the battery cover if the handpiece is wet.
•
Do not tighten the cover screw too much. This could strip the threads.
•
Dispose of old batteries in an environmentally safe way and in strict
according to local regulations.
