26
b)
Put the handpiece all the way into the battery charger. The Ready LED
(steady still purple) will go out and the Charge LED (purple) will flash and
start charging.
c)
When the battery is fully charged, the Charge LED (pulsating purple) goes
out and the Ready LED (steady still purple) will light up.
WARNING:
•
Do not touch the AC adapter if there is lightening while the battery is
being charged. This will result in an electric shock.
•
Do not use the battery charger in a place where it might get wet.
CAUTION:
Do not charge the handpiece with the probe cord connected or
wrapped around the handpiece. This could break a wire inside the cord or
damage the jack.
NOTE:
•
If the Charge LED (purple) goes off immediately or doesn’t light up when
the handpiece is put into the charger, the battery is already fully charged.
To make sure, take the handpiece out and put it back in again.
•
Do not leave the battery charger where it will be exposed to direct
sunlight.
•
Unplug the battery charger when it is not being used.
