12
2.4.6
Change Speed and Torque
CAUTION:
•
While the motor handpiece is in motion, speed and torque cannot be
changed;
•
In User Recipro file system, torque cannot be changed.
•
In all FKG file systems, rotation direction, speed, torque and rotation
angle cannot be changed. (fixed settings)
a)
Hold down until the Speed flash and press again to select speed
or torque to adjust.
b)
Press to adjust desired value.
c)
The change will be saved automatically. Press to exit the setting, or
exit the setting automatically after a few seconds.
NOTE:
When the user changes the default parameter, its value will prompt [ ].
