6
CAUTION:
•
Have components been sterilized? (Refer to chapter7)
•
Is the battery sufficiently charged? (Refer to chapter 5.1)
2.4
Endo Motor Mode
If not any test wire connected to the device, it’s in Endo Motor Mode.
Please refer to Fig. C, D
2.4.1
Connect the Components
a)
Connect contra angle
Line up the projection inside the contra angle with the notch inside the
motor and slide it in until it clicks securely into place.
b)
Connect file
Hold down the push button on the contra angle and insert the file. Turn the
file back and force until it is lined up with interior latch groove and slips into
place. Release the button to lock the file into the contra angle.
c)
Connect lighting device
Insert the lighting device into the motor handpiece and clip the electrode
on the file.
WARNING:
•
Make sure the connection ends of the motor handpiece and the contra
angle is not damaged. If these are damaged, the load on the contra angle
could cause the motor to reverse rotation, and this might result in an
injury to the oral cavity.
•
Files are expendable, and they eventually wear out. Replace them before
they break.
