36
USER WARNINGS
There are a number of user warnings, which are generally caused by the user
or poor installation. These warnings should be able to be corrected by the
user.
The machine signals user warnings by displaying a warning in plain text.
Where multiple words are displayed one word at a time with 1 second pause
between changing from one word to the other along with a rippling set of 5
beeps which are repeated every 6 seconds. This is the same tone that is
heard when the machine is first plugged into the mains power.
Most of this information is available to the user in the Use and Care manual.
Code
Description
01 No Taps
02 Wash level Overloaded
03 Out of Balance
04 Suds Lock
05 No Hot
06 No Cold
07 Agitator Overloaded
08 Lid Lock
09 Lid Open
The last user warning is also logged in diagnostics level d 00 which will be
displayed as a number from 01 through 09,
01 No Taps (no water)
Possible causes:
1.
The taps are not turned on.
2.
The inlet hoses may be kinked.
3.
The inlet hose filters at the tap end may be blocked.
4.
The inlet valve filter screens may be blocked.
5.
The flow rate of the supply water too slow. The product requires a
minimum flow rate of 6 litres per minute.
6.
The drain hose is too low or the drain hose pushed into the standpipe too
far and the water is siphoning out of the machine.