29
224
Motor Control Module Fault
The motor control has encountered a peripheral error
Primary Fault:
Motor Control Module.
Action:
Change Motor Control Module.
225
Motor Control Module Fault
The motor control has encountered a clock error
Primary Fault:
Motor Control Module.
Action:
Change Motor Control Module.
226
MarchX Ram Check Error
The motor control has encountered a RAM error
Primary Fault:
Motor Control Module.
Action:
Change Motor Control Module.
230.
EEPROM Value out of Range
Wrong version detected
Primary Fault:
Motor Control Module is the wrong version.
Action:
Change Motor Control Module.
232.
COMMS Timeout 5 Sec
Either the Display or Motor Control Module has not responded in time.
Primary Fault:
Display Module fault.
Action:
Replace Display Module.
Secondary Fault:
Motor Control Module fault.
Action:
Replace Motor Control Module.
233.
EEPROM Read Error
Problem in reading the EEPROM data, coming from the Motor Control Module
Primary Fault:
Motor Control Module fault.
Action:
Replace Motor Control Module.
234.
Lid Lock Open Circuit
Check harness to Lid Lock, the connections at the Motor Control Module and lid lock ends.
Primary Fault:
Connectors on the harness at either end could be at fault.
Action:
Replace Harness.
Secondary Source:
Lid lock has failed to be activated.
Action:
Replace Lid Lock Assembly.
Tertiary Source:
Motor Control Module
has not responded to the lid lock being activated.
Action:
Check the lid has a tang and is fitted correctly to activate the lid lock. If this is
all in order, the Motor Controller must be faulty and needs replacing.
235.
Lid Lock Short Circuit
Lid Lock fault, not activated when instructed to by the Motor Control Module.
Primary Fault:
Lid Lock mechanism has jammed or failed.
Action:
Check resistance across the connections, this should be 63 ohms +/-
10% @ 20
C. If faulty, replace the Lid Lock assembly.
236.
Incompatible EEPROM Version
Failed to start with fault being immediately displayed
Primary Fault:
Motor Control Module is wrong one.
Action:
Fit correct Motor Control Module.