FISCHER EA16 Series, Operating Manual

Page: 43 / 88

FISCHER Mess- und Regeltechnik GmbH Parameterization | 5
BA_EN_EA16 43 / 88
Submenu: Input signal [Level 5]
Menu path: Main menu/Configuration/Inputs/Analogue input 1/Input signal
Input signal Type: Voltage
Level 4 Level 5 (parameters)
1
2
3
Signal min.
0.000V
Input
Signal max
10,000V
Input
Fig. 63: Menu Input signal
Item Value range Description
1 Type: Voltage
Type: Current The signal type is defined with this para-
meter. Depending on the signal type, the
units of the following parameters will
change.
2 Signal min.
0.000V … 10.500 V
0.000mA … 20.500 mA
This parameter defines the lower signal
limit of the input signal. This entry must lie
within the permissible signal limits.
3 Signal max.
0.000V … 10.500 V
0.000mA … 20.500 mA
This parameter defines the upper signal
limit of the input signal. This entry must lie
within the permissible signal limits.
Submenu: Characteristic curve [Level 5]
The parameter function determines the characteristic curve type and can accept
the following values:
Signpost [►Page]
Function = <linear> [
}
44]
Function = <root extracted> [
}
46]
Function = <Flow rate> [
}
48]
Function = <Table> [
}
50]
Function = <Difference> [ } 53]
Function = <dyn. filter monitoring> [ } 56]
NOTICE! Each characteristic curve type requires other parameters so that
the menu changes depending on the parameter value.