FISCHER Mess- und Regeltechnik GmbH
Parameterization | 5
BA_EN_EA16
57 / 88
Pos. Value range
Description
7
Channel 1 V:1
1 … 4
This parameter determines the channel for
the volume flow measurement.
8
Channel 2 V:-
-,1 … 4
This parameter can determine a second
channel for the volume flow measurement.
The sum of channel 1 V + channel 2 V is
the total flow through the filter.
Channel 2 V is switched off with the value
'-'.
9
Max. volume flow
This parameter defines the upper limit for
the flow rate.
10
Measuring range start
The start of the measuring range is defined
with this parameter.
11
Measuring range end
The end of the measuring range is defined
with this parameter.
12
Limit
Yes
No
This parameter can be used to limit the dis-
play and output signal to the set difference
measuring range (start - end).
13
Damping
0.000 s … 30,000 s
The input signal can be dampened with this
parameter.
14
Correction value
This parameter can be used to set an offset
for the characteristic curve.
15
V-zero-point window
0 % … 50 %
The size of the zero-point window is
defined with this parameter.
Submenu: Characteristic curve dP [Level 6]
Menu path: Main menu/ Configuration/ Inputs/Analogue input 1/Characteristic
curve: Dyn. filter monitoring/Characteristic curve dP/
Characteristic curve dP
5. Level
6. Level (Parameter)
1
Unit
Pa
Input
2
Measuring range Start
10.000 Pa
Input
3
Measuring range End
100.000 Pa
Input
Fig. 80:
Submenu: Characteristic curve dP
Pos. Value range
Description
1
Unit
A unit for the measuring value display is
defined with this parameter. It must have a
length of at least 5 characters.
2
Measuring range start
The start of the measuring range is defined
with this parameter.
3
Measuring range end
The end of the measuring range is defined
with this parameter.
