FISCHER Mess- und Regeltechnik GmbH
Parameterization | 5
BA_EN_EA16
61 / 88
Submenu: Offset correction [Level 5]
Menu path: Main menu/Configuration/Inputs/Analogue input 1/Offset correction
Offset: reset
Level 4
Level 5 (parameters)
3
1
2
Offset: Auto Zero
0.000 Pa
Function
Offset: adapt
0.000 Pa
Input
Function
Offset correction
Fig. 86:
Menu Offset correction
Item Value range
Description
1
Offset: Auto Zero
The Auto Zero function is used to set the
current measured value to the display
value zero.
2
Offset: adapt
The offet can be adjusted manually within
the given limits with this parameter.
3
Offset: reset
This parameter is used to set the offset to
zero.
Submenu: Pres. of measurem. [Level 5]
Menu path: Main menu/Configuration/Inputs/Analogue input 1/Pres. of meas-
urem./
Pres. of measurem.
4. Level
5. Level (Parameter)
1
2
Pre-decimal places: 3
333.22
Decimal places: 2
333.22
Value displays:
3
v
Fig. 87:
Menu Pres. of measurem.
There are max 6 positions available for showing the measured value.
Pos. Value range
Description
1
Integer digits
The number of places in front of the
decimal point with this parameter.
2
Decimal Places
The number of places after the decimal
point is set with this parameter.
3
Display value
Yes
No
This parameter can be used to switch off
the measured value display. The 'state' of
the analogue input is only signalised by the
colour change.
