FISCHER Mess- und Regeltechnik GmbH
Attachments | 8
BA_EN_EA16
87 / 88
8 Attachments
8.1 EU Declaration of Conformity
EU Declaration of Conformity
For the product described as follows
Product designation
Type designation
Measuring value display
EA16
it is hereby declared that it corresponds with the basic requirements
specified in the following designated directives:
20 14130/EU
20 1 1165/EU
EMC Directive
RoHS Directive
The products were tested in compliance with the following standards.
EN 6 1326- 1:20 13
EN 6 1326-2-3:20 13
Electromagnetic compatibility (EMC)
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 1: General requirements
Electrical equipment for measurement, control and laboratory use - EMC requirements -
C€
(Translation)
Part 2-3: Particular requirements - Test configuration, operational conditions and performance
criteria for transducers with integrated or remote signal conditioning
EN 5058 1:20 12
RoHS
Technical documentation for the assessment of electrical and electronic products with respect to
the restriction of hazardous substances
Also they were subjected to the conformity assessment procedure
,,Interna! production control".
The object of the declaration described above is in conformity with Directive 2011/65/EU of the European
Parliament and of the Council of
8
June 2011 on the restriction of the use of certain hazardous substances in
electrical and electronic equipment.
Sole responsibility for the issue of this declaration of conformity in relation to fulfilment of the fundamental
requirements and the production of the technical documents is with the manufacturer.
Manufacturer
Documentation
representative
The devices bear the
following marking:
Bad Salzuflen,
2016-09-28
FISCHER Mess- und Regeltechnik GmbH
Bielefelder Str. 37a
32107 Bad Salzuflen, Germany
Tel. +49 5222 974 0
Mr. Stefan Richter
Dipl. Ing.
General Manager R & D
CE
S. Richter
General Manager R & D
Seite 1von1
Fig. 124:
CE_DE_EA16
