FISCHER Mess- und Regeltechnik GmbH
Parameterization | 5
BA_EN_EA16
81 / 88
5.4.6.7 Menu: Data transfer SD->USB [Level 3]
Menu path: Main menu/System/data transfer SD>USB/
Data transfer SD-USB
Level 2
Level 3 (Function)
P
Esc
K
I
Q
../Data transfer SD ->USB
K
I
K
I
Start:
End.:
14 . 27 . 42
17 . 06 . 2016
J
Fig. 120:
Menu: Data transfer SD ->USB
This function is used to copy the logger and event data from the SD card to a
USB stick. Data transfers can only be performed in a daily basis. The duration
of the transfer depends on the configuration of the datalogger. In the case of
very large time periods and a high logging rate, the transfer may take a long
time. During the transfer process the outputs are 'frozen'.
The transfer is started with the OK button. The following dialogue box appears.
scanning for files
81/100%
Cancel
The progress of the transfer process is shown. It is possible to interrupt the
transfer process.
5.4.6.8 Menu: Convert log data [Level 3]
Menu path: Main menu/ System/Convert log data/
ESC
K
J
I
Convert log data
Data transfer SD -> USB
Eject SD card
Delete SD card
Convert log data
2. Level
3. Level (Function)
Change password
Main menu/System
P Q
Convert log data?
YES
NO
Fig. 121:
Menu: Convert log data
As of Firmware V1.5 the log data is saved in a new directory structure to im-
prove performance. After a firmware update, this function converts the data to
the new format.
