FISCHBEIN PBC-6000, Operator'S Manual

Page: 9 / 82

FISCHBEIN
®
Co. MODEL PBC-6000™
OPERATOR’S MANUAL
REV. D 2005-03 9
4.3 ACCESSORIES AND OPTIONS
The PBC 6000 is available by request with some special options:
Larger Folder: Kits are available to convert Left-to-Right and Right-to-Left PBC
machines with 1 ¾” folders to 2 3/8” folders and to convert 2 3/8”
folder to 1 ¾”.
Extended Infeed:
An automated 17inch (432mm) infeed is available for specific
applications.
Infeed Options:
The PBC is available with an automated infeed or a manual infeed.
The manual infeed is extended and has a bag guide to assist the
operator in properly feeding a bag top into the machine. Some kits are
available to convert between automate and manual infeeds.
Bag Counter:
The PBC 6000 is capable of having a digital bag counter mounted on
the face of the electrical control panel.
Coder:
An ink coder is available for printing on the front or back side of the
bag.
Air Dryer:
For compressed air systems that do not dry their air, an air dryer is
available for the PBC pneumatic system.
Height Extension:
The PBC frame is available with an extension for the vertical range of
motion. The extension adds about 12 inches (304,8mm) to the height
range of the machine.
Motorized Height
Adjustment:
The standard PBC 6000 comes with a manual system to raise and
lower the machine. A motorized system is available, with a control
switch on the front control panel. The system also has electrical limit
switches to prevent the machine from going too far on the ACME
screws within the frame.
Left to Right:
The standard PBC 6000 transports and seals bags through its system in
a right to left direction. The machine can be ordered to seal the bags in
a left to right orientation.
Reverse Fold:
The standard PBC 6000 folds the bag top towards the front of the
machine. It can be ordered to seal the bag by folding the top towards
the rear of the machine. This option is also available in the left to right
oriented machines.
NEMA 4:
The PBC 6000 is available in a NEMA 4 configuration.
Bearings Kit:
Optional drive shaft upgrade bearing kit (#17896). Includes heavy
duty flange bearings and drive shafts.