FISCHBEIN PBC-6000, Operator'S Manual, Page: 4 / 82

FISCHBEIN
®
Co. MODEL PBC-6000™
OPERATOR’S MANUAL
REV. D 2005-03 4
1.1 GENERAL SAFETY PRECAUTIONS
The PBC 6000 system is driven by strong motors, contains moving parts with pinch points and sharp
edges and hot machine surfaces. Therefore, technical training and familiarity with this type of
equipment are required to operate and maintain the system. Installers and operators of PBC 6000
should wear proper eye, foot, and hand protection. Turn off and lock out air and power sources when
cleaning or performing maintenance. Once the air source has been locked out, existing air pressure in
the system will be released.
1.2 SAFETY STATEMENT
F
ISCHBEIN IS NOT RESPONSIBLE FOR DAMAGE OR INJURIES CAUSED BY MISUSE OF THE
EQUIPMENT
,
FOR CARELESS OPERATION OR IF IT IS USED TO SEAL MATERIALS FOR WHICH IT
WAS NEVER DESIGNED
.
Installers of this machine should wear eye and foot protection at all times
and gloves when working around the hot machine surfaces. Operators must always wear proper
eye protection when operating this machine and not wear loose clothing or jewelry. Long hair
must be pulled back and tied to avoid getting caught in the belts and rollers.
1.3 REVISION CHANGES
The revision of this manual has been upgraded to D to reflect the improvements to the assemblies
on drawings 17708 and 17701A in the back of this manual.
2. WARRANTY STATEMENT
Nothing contained in this document is intended to extend any promise, warranty or representation,
expressed or implied, regarding the FISCHBEIN products described herein. Any such warranties
or other terms and conditions of products shall be in accordance with the standard terms and
conditions of sale for such products, which are available upon request. FISCHBEIN reserves the
right to make changes and improvements to products without notice and without incurring any
obligation to make such changes or add such improvements to products sold previously.
3. WARNINGS
•
Always use
genuine
Fischbein parts. Our parts are specifically designed for Fischbein equipment
to provide optimum performance and safety. Use of non-Fischbein parts can also void the product
warranty.
•
Employees shall receive training by the employer on proper equipment operation and shutdown
of this machine.
•
Let the machine do the work. Do not pull the bag or materials through it.
•
This PBC 6000 system is not suitable to operate in an area where explosive materials are present
(explosive gas, powders, vapors or liquids).
•
Read and follow the manuals for the devices used in the PBC 6000 System. The accompanying
manuals are in the electrical enclosure. These manuals will provide the appropriate instructions
for operating and maintaining individual components.