Fimar GYR60, Use And Maintenance

Page: 44 / 168

- 20 - English language
GYROS (GAS POWERED)
GB
burner nozzle replacement
1- Loosen the screws and remove the
rear panel.
2- Unscrew the nozzle (A) and replace it
with the one suited for the gas used.
3- Reassemble the rear panel and secure
it with the screws.
Heat power adjustment to minimum
METHANE GAS powered appliance
1- Remove the knob.
2- Loosen the screw (B) (about 2/3 turn)
and assemble the knob.
3- Turn on the burner , rotate the knob to
the minimum power position.
4- Pull out the knob and tighten the screw
(B) until the flame is stable.
5- Assemble the burner control knob and rotate it to turn it off.
6- Repeat minimum adjustment on the other burner.
LIQUID PROPANE GAS powered appliance (LPG)
1- Pull out the knobs.
2- Fully tighten the minimum adjustment screw (B) .
3- Assemble the knobs.
4- Turn on the appliance and make sure the flame is stable.
5- Turning off the appliance
A
IDM-34605600600.pdf
B
ID
M-346
01900500.
tif