3
3-16
Using Fiery WebSetup
Service Setup (Windows Printing Service)
For setting up the Windows printing service, these characters are allowed in the text
fields: uppercase letters, numerals, space, and the following characters:
- _ . ~ ! @ # $ % ^ & ( ) { } \ ' ,
N
OTE
:
Lowercase letters are not allowed, except in the Comment field.
Enable Windows Printing Service
—Select to enable SMB (Server Message Block), the
file and printer sharing protocol built into Windows. Enabling SMB allows the
Fiery XJ to be listed on the network so that Windows clients can print to a particular
print connection (Hold, Print, or Direct) on the Fiery XJ without any other
networking software. For information on how to set up a Windows client for
Windows printing, see Getting Started.
N
OTE
:
Windows (SMB) printing runs over TCP/IP, so TCP/IP must be configured on
all the Fiery XJ and on workstations that use Windows printing.
Server Name
—The server name is the name that will appear on the network. It can,
but does not have to, be the same name as the server name assigned in Server Setup
(see page 2-8 and page 3-3).
Comment
—Server comments (optional) can contain information about the printer.
These comments are listed in the Properties of the Fiery XJ in Network
Neighborhood. Comments can be up to 15 characters long. Lowercase letters are
allowed in this field.
Domain or Workgroup
—Enter the workgroup or domain you want the Fiery XJ to
appear in.
Use WINS Server
—Select to use a WINS name server. Broadcasts from SMB devices
cannot be routed beyond their original network segment without a WINS name
server. Setting up the WINS name server is outside the scope of this manual. To find
out if a name server is available, contact your network administrator.
IP Address
—Enter the IP address of the WINS Server.