3
3-1
Fiery XJ Setup from Fiery WebSetup
After you have performed initial Setup (Server, Network and Printer Setup) from the
Control Panel, you can complete or change most Setup options using Fiery WebSetup
via an Internet or intranet connection to the Fiery XJ.
In addition, you can perform Setup from the Command WorkStation by selecting
Setup from the Server menu. You can install the Command WorkStation application
on Windows 95 workstations networked to the Fiery XJ. See Getting Started for
information on the Command WorkStation and Fiery WebSetup system
requirements.
N
OTE
:
Fiery WebSetup is supported for Windows 95 and Windows NT 4.0 computers
only.
N
OTE
:
The interface of Setup from the Command WorkStation and from
Fiery WebSetup is identical. This chapter depicts the windows from Fiery WebSetup.
Fiery XJ Setup from Fiery WebSetup
After changing Setup option settings from Fiery WebSetup, you must reboot the
Fiery XJ before your changes take effect. See page 3-21 for instructions.
T
O
ACCESS
F
IERY
W
EB
S
ETUP
:
1.
Launch your browser application and enter the IP address of the Fiery XJ.
2.
If prompted for a Fiery WebTools login level, select Administrator, enter the
Administrator password, and click OK.
3.
When the Fiery XJ home page appears, click the WebSetup button.
Chapter 3:
Using
Fiery WebSetup
