xviii
Introduction
WebLink
WebLink provides a link to a pre-set Fiery WebLink destination. The WebLink
destination can be changed (see 2-45). This function requires the Administrator
password, if one has been set. See “Passwords” on page xvi.
N
OTE
:
If no Administrator password has been set, any user can set the WebLink
destination. For this reason, it is strongly recommended that you set an Administrator
password.
Installer
The Installer WebTool allows users to download printer files installers directly from the
Fiery XJ. It is not affected by any password setting. For more information, see Getting
Started.
WebSetup
WebSetup allows you to view and modify Fiery XJ Setup option settings from a remote
workstation. For more information, see Chapter 3.
Control level scenarios
Typical scenarios of access and control, ranging from least control to strictest control,
are described below. Choose the scenario that best matches your site requirements, and
then refer to the corresponding number for guidance on how to configure your system
for those requirements.
N
OTE
:
It is strongly recommended that you set at least an Administrator password to
prevent unauthorized changes to system settings.
1.
(Least control—not recommended) No designated administrator or operator
All users have equal access to all system functions including Setup, clearing the
Fiery XJ, deleting printer fonts, setting the WebLink destination, performing
calibration, printing to all Fiery XJ print connections, and managing all jobs from
remote workstations.
2.
A designated administrator but no designated operator
Only an administrator can perform Setup and other administrator functions, but all
other system functions are accessible to all users, including performing calibration,
printing to all Fiery XJ print connections, and managing all jobs from remote
workstations.