5
5-5
Troubleshooting the Fiery XJ
Frame Type selection
(Network Protocol Setup >
IPX>SPX Setup)
Invalid frame size.
The network hub is not connected to a Novell machine
when the Fiery XJ tries to bind.
Warning! IPX network
number is zero.
No other IPX machine can be found on the network, or
the network hub is not connected to the network, when
the Fiery XJ tries to bind. When this occurs, the network
number defaults to zero.
Can’t detect Token Ring
hardware.
Token Ring hardware
not installed or
not functioning.
Fiery XJ queries the Token Ring hardware. Error indicates
that some components are not installed, are not installed
correctly, or not installed in the correct device. An
unsupported Token Ring board may be in use. Check with
your authorized service/support center.
Token Ring Setup
Can’t autodetect the ring
speed. No device on ring.
The Fiery XJ is trying to detect the current ring speed, but
it is the only machine on the Token Ring network.
Connect another machine to the Token Ring network first,
before connecting the Fiery XJ.
Enable NDS
(Network Service Setup>
PServer Setup > NDS Setup)
No NDS trees found.
No NDS trees were found on the Novell network. Check
to see that the frame types on the Fiery XJ are properly
configured.
Select NDS Tree
(Network Service Setup >
PServer Setup>NDS Setup)
Warning! Selecting a new NDS
tree deletes Bindery setup.
You have previously connected the Fiery XJ to a different
NDS tree. NetWise supports only a single NDS tree
connection. To avoid a potential conflict with an existing
tree connection (for example, if the connection was made
through a NetWare 4.x server in emulation mode), all
bindery settings will be deleted.
If you choose OK, and choose Yes in the following message
screen (
Delete Bindery setup and continue?
), bindery
settings are deleted and have to be re-entered in Bindery
Setup.
To avoid deleting the bindery settings, press the Menu key,
or select OK and choose No in the following message
screen (
Delete Bindery setup and continue?
).
Repeat NDS Setup without changing the NDS tree, or exit
to Bindery Setup to review your current bindery settings.
After this Setup screen:
This message:
Means: