Fiery KM-C3130 User Software Installation Manual Download

Page: 59 / 136

1-43

Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003

Enter the Fiery X3e IP address or DNS name.

If you want your printer driver to display the current settings when opened, select the
Update Fiery Driver When Opened option.

Click Update.

Click OK.

Completing the Windows 2000/XP/Server 2003 printer
connection

To print from Windows 2000/XP/Server 2003, you must:

• Set up network servers, if any.

• Set up the Fiery X3e to accept print jobs from your computer.

• Configure a port on each Windows 2000/XP/Server 2003 computer for the network

type.

OTE

The procedures for completing the printer connection for Windows 2000 and

Windows XP/Server 2003 are similar. Windows 2000 illustrations are used in the
following procedure, with relevant differences noted in the text.

To do this

See

Configure the parallel connection

“Completing the Windows 2000/XP/Server
2003 parallel port connection”

in this section

Configure the TCP/IP (LPR port)
connection

“Completing the Windows 2000/XP/Server
2003 TCP/IP and Port 9100 or
LPR connection”

on page 1-45

Configure the IPX (Novell) connection

“Completing the Windows 2000/XP/Server
2003 IPX (Novell) connection”

on page 1-50

Summary of Contents for KM-C3130









































































































































Search results

Summary of Contents for KM-C3130

Reviews:

Related manuals for KM-C3130

Brands by name

Popular brands

Fiery KM-C3130, User Software Installation Manual

Search results

Summary of Contents for KM-C3130

Reviews:

Related manuals for KM-C3130

Brands by name

Popular brands