1
1-45
Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003
Completing the Windows 2000/XP/Server 2003 TCP/IP and Port 9100 or
LPR connection
Once you have installed the PostScript and printer driver files, complete the setup
for the TCP/IP and LPR connection as follows:
• Prepare the Fiery X3e to accept print jobs using TCP/IP and LPR protocols.
• Enable LPD or Port 9100 from the Fiery X3e Control Panel. For details, see the
• Configure the computer for the TCP/IP connection.
Before you continue, contact the system administrator for the IP address assigned to
the Fiery X3e, as well as the subnet mask and the gateway address, if they are used.
The TCP/IP protocol should already be installed on the Windows 2000/XP/Server
2003 workstation.
N
OTE
:
You can also set up the LPR connection by installing Print Services for UNIX,
which is supplied as an add-on Windows component with your Windows
2000/XP/Server 2003 CD. For more information, see your Windows documentation.
