Fiery KM-C3130 User Software Installation Manual Download

Page: 41 / 136

1-25

Setting up PostScript or PCL printing with Windows NT 4.0

CONFIGURE

INSTALLABLE

OPTIONS

THE

IERY

FROM

THE

PCL

PRINTER

DRIVER

Click Start, choose Settings, and then choose Printers.

Right-click the Fiery X3e icon, and choose Document Defaults from the File menu.

Click the Configuration tab and specify the options installed on the Fiery X3e.

Select an installed option from the Available Options list, and click Add to move the
option to the Installed Options list.

Engine Configuration

—Copier, Printer

Optional Trays

—Not Installed, Universal Cassette (Tray 3), Universal Cassettes

(Tray 3, 4), LCC (Tray 3)

Duplex Option

—Not Installed, Installed

Finisher Option

—Not Installed, Single Staple Finisher, Folding Finisher

Engine Storage Option

—Not Installed, Extension Memory, Hard Disk Drive,

Extension Memory and Hard Disk Drive

Click OK.

You are ready to connect to your network type (see

“Completing the Windows NT 4.0

printer connection”

on page 1-28).

Summary of Contents for KM-C3130









































































































































Search results

Summary of Contents for KM-C3130

Reviews:

Related manuals for KM-C3130

Brands by name

Popular brands

Fiery KM-C3130, User Software Installation Manual

Search results

Summary of Contents for KM-C3130

Reviews:

Related manuals for KM-C3130

Brands by name

Popular brands