GSM1010M Gigabit Converter
9
7- Power Connection
CAUTION: When connecting a device to an AC(DC) power outlet,
always first connect the cord to the device, and ensure that it is
securely fastened. Only afterward connect the cord to the wall
outlet. Make sure to use grounded (3 way) outlets (in case of AC
models).
For each country FibroLAN (or FibroLAN’s distributor) provide with the
product an appropriate power supply cord which is safety approved in
accordance with related country’s National Electric Code
GSM1010M ( all models ) AC connection
Connect to AC line socket at the rear of the converter, using the included power cord. The
GSM1010M
will accept and automatically switch between any line voltage from 100 to
240 VAC, 50-60 Hz.
There is no ON/OFF switch on the device. When the power is connected to the device,
the device is ON. The POWER LED on the front panel being illuminated will indicate this
mode.
GSM1010M with 48 VDC Power Supply ( PS48 )
-48VDC
0V
Proceed as above using a suitable DC supply cable. Ensure that the polarity of the cable
complies with the polarity of the DC receptacle on the device as depicted above.
There is no ON/OFF switch on the device. When the power is connected to the device,
the device is ON. The POWER LED being illuminated will indicate this mode.
You may order/use the FibroLAN DC Power Supply cable (CBPS-DC48V)
NEVER OPEN THE DEVICE WHEN IT IS CONNECTED TO POWER LINES!
Note: before applying Power to the unit, ensure that the LB DIP switches are in
DOWN position (disable LB) to avoid instability after Power On.
