GSM1010M Gigabit Converter
5
•
Versatile installation: desktop, shelf or wall-mount
•
Diagnostics LED indicators for Link and Activity monitoring each port.
•
Optional Extended Temperature Range (ETR)
•
Front Panel DIP switches for LB (loop-back) and LST for each port.
•
Front panel MA Active LED
•
Remote MA management
•
Supports SLE (Subscriber Link Emulation) through remote management
•
Supports FEF feature (Far-End-Fault)
3 - Content of the shipping container
The contents of the GSM shipping container is:
•
One GSM1010M unit
•
One AC power cord (excluding shipment to certain countries)
(Power cords for DC (-48V) models are NOT supplied)
•
Four plastic “ feet “
•
User and Installation Guide manual
4 - Product Description
The GSM devices are offered in the following preconfigured versions as shown in
the below tables:
GSM1014M
1000Base-T, RJ-45 to 1000Base-SX, SC, Multi- Mode 850nm, 220m, SNMP
managed and MA enabled
GSM1010M
1000Base-T, RJ-45 to 1000Base-LX, SC, Single Mode 1310nm, 10km, SNMP
managed and MA enabled
GSM1011M
1000Base-T, RJ-45 to 1000Base-LX, SC, Single Mode 1310nm, 20km, (over G.652
fiber), SNMP managed and MA enabled
GSM1012M
1000Base-T, RJ-45 to 1000Base-LX, SC, Single Mode 1550nm, 40km, SNMP
managed and MA enabled
GSM1013M
1000Base-T, RJ-45 to 1000Base-LX, SC, Single Mode 1550nm, 80km, SNMP
managed and MA enabled
GSM1010MF13
1000Base-T, RJ-45 to 1000Base-LX, SC, Single Mode Single Fiber Strand, 1310nm
Tx / 1550nm Rx, 20km (over G.652 fiber), SNMP managed and MA enabled
GSM1010MF15
1000Base-T, RJ-45 to 1000Base-LX, SC, Single Mode Single Fiber Strand,
1550nm Tx / 1310nm Rx, 20km (over G.652 fiber), SNMP managed and MA
enabled
Note: the
GSM1014M device may cover a F/O Link distance of 550m if a F/O cabling of 50/125µm
is deployed, 220m when a F/O cable of 62.5/125µm is used.
All GSM1010M models have common basic functionalities. Therefore, any description
and features of one model refers to all other types.
The GSM1010M design provides a reliable and steady conversion, advanced control,
diagnostic feature and management, while maintaining full compatibility with other
vendors ‘ standard GBE equipment.
The copper port is 1000Base-T, shielded RJ45 port, supporting Auto-cross feature and
Auto-Polarity correction. With Auto -Cross, the RJ45 port has the intelligence to sense the
type of cable, which has been connected to it and will automatically configure itself to
either MDI or MDI-X mode of operation.
