GSM1010M Gigabit Converter
41
Device control:
===============
[1] Set channel description
[2] LB/LST control
[3] Set upstream bandwidth
[4] Enable/Disable channel
[5] Restore device defaults
[0] Back to main module menu
Figure 3
– GSM1000/MA control menu
The LB/LST control menu allows you to set the LST mode of the device and to set the
loop back mode of port 2. Note that this is a local loop back and has nothing to do with
the loop back test that is found in other devices.
Back to main module menu implies back to main device menu
Channel LB/LST control:
=======================
[1] P2->P1 LST mode
[2] P2 loop back mode
[0] Back to device control menu
Figure 4
– GSM1000/MA LB/LST control menu
Selecting any of the options will prompt the user for the desired mode.
The device’s default settings include: LST on, LB off, channel enabled, empty channel
description, 1000Mbps upstream BW.
Device default settings
The default settings for this device are:
•
Upstream bandwidth 1000Mbps
•
Channel (device) enabled
•
LB disabled
•
LST enabled (LST ON)
•
No port description
