GSM1010M Gigabit Converter
42
20 - GSM1010/MA CPE Management
This section deals with managing a GSM1010/MA remote CPE, connected via fiber to
a GSM1010M Master Unit, through either the serial connection or a Telnet connection.
The GSM1010/MA main menu is reached through the ‘Remote device’ option in the
‘Link management’ menu of GSM1010M device.
The main menu
This menu contains a header with the master system’s name (GSM1010M), to which
the GSM1010/MA is connected. The main menu enables the user to display the
device’s status (1) or to enter the device’s control menu (2).
GSM1010M/MA link - remote device – GSM1010/MA
==================================================
]
1
[
Device status
]
2
[
Device control
]
0
[
Back to GSM1010M/MA menu
Figure 1
– GSM1010/MA main menu
CPE status
The CPE’s status (figure - 2) contains the following information:
•
Link status (FO port and TP port)
•
Signal detect status (FO port)
•
Device enabled
•
LST mode
•
Loop back (LB) mode (FO port)
Device status:
Link SD LST LB
TP FO FO Enabled FO->TP FO Bandwidth (up)
==================================================
On On On On On On 1000Mbps
==================================================
Description: ‘sami ben tovim’
Firmware revision: 1.3
Figure 2
– GSM1010/MA status
CPE control
T
he CPE’s control menu (figure - 3) provides with options to control:
•
Set the channel’s description (channel=device)
•
Invoke the LB/LST control menu (figure - 4)
•
Set the link’s upstream BW (0 – 1000Mbps, in 10Mbps increments)
•
Enable/disable channel (device)
•
Restore device’s default configuration
Device control:
===============
[1] Set channel description
[2] LB/LST control
[3] Set upstream bandwidth
[4] Enable/Disable channel
[5] Restore device defaults
[0] Back to module main menu
Figure 3
– GSM1010/MA control menu
