GSM1010M Gigabit Converter
10
8 - Fiber Optic Connection
The GSM1010M series products are equipped with Duplex SC-type connector.
Do not remove the protective covers on the fiber connectors until you are ready to
connect the fiber optic cables. Power should be connected before attaching the fiber optic
cables. When dealing with fiber optic cables, it is essential to ensure that the Tx at one
end of the link is connected to the Rx at the other end of the link.
Some duplex fiber optic cables are color coded to help monitor the direction of data
transmission. If the fibers are not coded, special attention must be paid to ensure a
proper connection.
CAUTION
Radiation emitted from a fiber optic connector may
be hazardous to human vision. Therefore, the
following rules must be strictly observed.
All single-mode (SM) models are
CLASS I LASER PRODUCTS
And must be handled with special care
When not in use, keep the fiber optic connector
closed using its protective cover.
Never stare directly into the fiber optic connector of
a powered device or into the end of a fiber
connected to it.
F/O port specifications
(common to GSM1010M, GSM1010M, and GSM1010M)
Model
Port
2
Minimal
Output
Power
Typical
Receive
Sensitivity
Wavelength
Suggested
Distance
Km
Power Budget
(Minimum)
GSM1014M
-9.5dBm
-17dBm
850nm
200m
7.5
dB
GSM1010M
-13dBm
-20dBm
1310nm
0-10
7dB
GSM1011M
-5dBm -20dBm
1310nm
5-20
15
dB
GSM1012M
-8dBm -23dBm 1550nm/DFB 10-40
15
dB
GSM1013M
0dBm -24dBm 1550nm/DFB 25-80
24
dB
GSM1010MF13
-5dBm
-20dBm
1310nmTx/1550nmRx
0-20*
15dB
GSM1010MF15
-5dBm
-20 dBm
1550nmTx/1310nmRx
0-20*
15dB
*
Over G.652 fiber
