Fiat Ulysse Owner'S Handbook Manual Download Page 65

Page: 65 / 254

GETTING TO KNOW YOUR CAR

THIRD ROW DIRECTIONAL
VENT ADJUSTMENT fig. 87

Use lever

to direct the air flow.

Use slider

(

–

) to adjust the air

flow capacity.

MANUAL CLIMATE
CONTROL SYSTEM

The car can be fitted with manual cli-

mate control system to control tem-
perature, air flow, distribution and re-
circulation.

AIR DISTRIBUTION

Air distribution options are the fol-

lowing:

– ventilation (front)

– bilevel (front/feet)

– feet

– windscreen/feet

– MAX-DEF function.

Air is also delivered to second and

third row seat.

Ventilation

The treated air flow passes through

5 front vents placed on the edge and
in the middle of the dashboard. The air
flow can be directed both horizontal-
ly and vertically by adjusting manually
the tab position and the control lever.

Air capacity can be adjusted by ro-

tating the vent sliders.

Bilevel function

The air flow is distributed in the fol-

lowing way: 45% ventilation, 45% feet,
10% windscreen.

With this setting treated air is di-

rected towards the feet of front and
rear seat passengers and towards the
dashboard vents.

fig. 87

F0B0186b

Summary of Contents for Ulysse































































































































































































































































Search results

Summary of Contents for Ulysse

Reviews:

Related manuals for Ulysse

Brands by name

Popular brands

Fiat Ulysse, Owner'S Handbook Manual

Search results

Summary of Contents for Ulysse

Reviews:

Related manuals for Ulysse

Brands by name

Popular brands