manualshive.com logo in svg

Fiat Ulysse, Owner'S Handbook Manual

The "Atlantic Ulysse" User And Installation Manual provides comprehensive instructions for effortless installation and optimal use of this extraordinary product. This manual can be easily downloaded from our website manualshive.com for free, ensuring you have all the information you need to make the most of your Atlantic Ulysse.

Share
Download
background image

IN AN EMERGENCY

155

An incorrectly posi-

tioned jack may cause the
vehicle to fall. Do not use

the jack to lift loads exceeding
that indicated on the label at-
tached to the jack itself.

Do not lubricate the bolt

threads before fitting
them back: they could

come loose.

Never start the engine when the

vehicle is jacked up.

If you are towing a trailer, re-

move the trailer before jacking
up the vehicle.

Never tamper with the

inflation valve. Never
place tools between the

rim and the tyre.

Check the tyre and space-saver

spare wheel pressure regularly.
The tyre inflation pressure is
shown in the “Technical specifi-
cations” chapter.

The jack should only be

used to change a wheel
on the vehicle for which it

was designed. It should not be put
to other uses or employed to
raise other models. Under no cir-
cumstances should it be used
when carrying out repairs under
the vehicle.

Check the inflation pres-

sure of the tyres and the
spare wheel regularly. If

you change the type of wheels (al-
loy rims instead of steel rims) you
will have to change the entire set
of fastening bolts with another
set of suitably sized bolts.

You should keep the bolts in

case you decide to use the origi-
nal type of wheel later on.

Signal the presence of

the stopped car according
to the laws in force: haz-

ard lights, reflecting triangle, etc.

Any passengers on board should

leave the car, especially if it is
heavily laden. Passengers should
stay away from oncoming traffic
while the wheel is being changed.

If the wheel is being changed on

a steep or badly surfaced road,
place wedges or other suitable
material under the wheels to
stop the car.

GENERAL INSTRUCTIONS

Observe the instructions on this and

the following pages to use the jack and
space-saver spare wheel correctly.

Summary of Contents for Ulysse































































































































































































































































Reviews:

No comments

Related manuals for Ulysse

Baja Designs S8 Instructions Manual preview
S8
Brand: Baja Designs Pages: 6
Suzuki Movano Owner'S Manual preview
Movano
Brand: Suzuki Pages: 353
Torklift F2012 Installation Instructions Manual preview
F2012
Brand: Torklift Pages: 16
Wagan Road Ready Seat Protector User Manual preview
Road Ready Seat Protector
Brand: Wagan Pages: 12
Chevrolet 2016 Suburban Owner'S Manual preview
2016 Suburban
Brand: Chevrolet Pages: 50
Renault ALASKAN 2017 Driver'S Handbook Manual preview
ALASKAN 2017
Brand: Renault Pages: 340
Whispbar K951W Fitting Instructions For Basic Carrier preview
K951W
Brand: Whispbar Pages: 15
VER-MAC PCMS Series Operation, Safety And Maintenance Manual preview
PCMS Series
Brand: VER-MAC Pages: 64
KEKO K162 Installation Instructions Manual preview
K162
Brand: KEKO Pages: 13
Road Armor Stealth 4191F Series Install Instructions preview
Stealth 4191F Series
Brand: Road Armor Pages: 5
Tabernus Peram Hatch-bag Luggage System Installation Instructions Manual preview
Hatch-bag Luggage System
Brand: Tabernus Peram Pages: 10
Rugged Ridge 11232.20 Quick Start Manual preview
11232.20
Brand: Rugged Ridge Pages: 2
Mercedes-Benz W211 Manual preview
W211
Brand: Mercedes-Benz Pages: 27
Ace K9 HA-2520 Installation Manual preview
HA-2520
Brand: Ace K9 Pages: 14
Buick 2010 Lucerne Owner'S Manual preview
2010 Lucerne
Brand: Buick Pages: 475
Westin 40-1245 Installation Instructions preview
40-1245
Brand: Westin Pages: 2
Chevrolet Chevelle 1965 Owner'S Manual preview
Chevelle 1965
Brand: Chevrolet Pages: 55
Alu-Cab SH-BKT-RC-TY Fitment Instructions preview
SH-BKT-RC-TY
Brand: Alu-Cab Pages: 6

Brands by name

Popular brands

Load more brands