Fiat Ulysse Owner'S Handbook Manual Download Page 107

Page: 107 / 254

GETTING TO KNOW YOUR CAR

106

The driver’s window winder is fitted

with an “automatic continuous oper-
ation” (working only when the engine
is started) to wind up or lower the
window. Press

briefly and the win-

dow will automatically reach its trav-
el end. If you press the button a sec-
ond time, the window will stop in the
required position.

Passenger’s door fig. 146

Button

is housed on the door in-

ner panel to operate the relative win-
dow.

Sliding doors

They are fitted with a crank handle

for operating the window manually.

VERSIONS WITH REAR
DOOR ELECTRIC WINDOWS

Driver’s door fig. 147

There are five buttons on the driver’s

door inner panel. When the ignition
key is at

they control:

- front left window opening/clos-

ing;

- front right window opening/clos-

ing;

- rear left window opening/closing;

- rear right window opening/clos-

ing;

- window control lock on rear

doors, sliding door opening/closing
rear control lock and (for ver-
sions/markets, where provided) rear
sunroof control lock.

To open or close the window, press

the relative button. When the button
is released, the window will stop in the
position it has reached.

The driver’s window winder is fitted

with an “automatic continuous oper-
ation” (working only when the engine
is started) to wind up or lower the
window. Press

briefly and the win-

dow will automatically reach its trav-
el end. If you press the button a sec-
ond time, the window will stop in the
required position.

fig. 146

F0B0046b

fig. 147

F0B0047b

Summary of Contents for Ulysse































































































































































































































































Search results

Summary of Contents for Ulysse

Reviews:

Related manuals for Ulysse

Brands by name

Popular brands

Fiat Ulysse, Owner'S Handbook Manual

Search results

Summary of Contents for Ulysse

Reviews:

Related manuals for Ulysse

Brands by name

Popular brands