manualshive.com logo in svg

Fiat Ulysse, Owner'S Handbook Manual

The "Atlantic Ulysse" User And Installation Manual provides comprehensive instructions for effortless installation and optimal use of this extraordinary product. This manual can be easily downloaded from our website manualshive.com for free, ensuring you have all the information you need to make the most of your Atlantic Ulysse.

Share
Download
background image

GETTING TO KNOW YOUR CAR

133

INSTALLATION OF
ELECTRIC/ ELECTRONIC
DEVICES

Electric/electronic devices installed

after buying the vehicle or in after-
market shall bear the and marking:

Fiat Auto S.p.A. authorizes the in-

stallation of transceivers provided that
installation is carried out at a special-
ized shop, workmanlike performed
and in compliance with manufacturer's
specifications.

IMPORTANT Installation of devices

resulting in modifications of vehicle
characteristics may cause driving li-
cense seizing by traffic agents and al-
so the lapse of the warranty as con-
cerns defects due to the abovemen-
tioned modification or traceable back
to it directly or indirectly.

Fiat Auto S.p.A. declines all respon-

sibility for damages caused by the in-
stallation of non-genuine accessories
or not recommended by Fiat Auto
S.p.A. and installed not in compliance
with the specified requirements.

RADIO TRANSMITTERS AND
CELLULAR TELEPHONES 

Radio transceiver equipment (e.g.: e-

tacs mobile phones, HAM radio sys-
tems and the like) shall not be used in-
side the vehicle unless a separate aer-
ial is mounted on the roof.

IMPORTANT The use of similar de-

vices inside the passenger compart-
ment (without separated aerial) pro-
duces radio-frequency electromag-
netic fields which, amplified by the res-
onance effects inside the passenger
compartment, may cause electrical
systems equipping the vehicle to mal-
function. This could compromise safe-
ty in addition to constituting a poten-
tial hazard for the passengers.

In addition, transmission and recep-

tion of these devices may be affected
by the shielding effect of the vehicle
body.

As concerns EC-approved mobile

phones (GSM, GPRS, UMTS), strictly
comply with the instructions for use
provided by the mobile phone’s man-
ufacturer.

Summary of Contents for Ulysse































































































































































































































































Reviews:

No comments

Related manuals for Ulysse

Camcar 2155 Fitting Instructions preview
2155
Brand: Camcar Pages: 2
Lange Originals HOIST-A-TOP JL CRANK Installation Instructions Manual preview
HOIST-A-TOP JL CRANK
Brand: Lange Originals Pages: 13
M7 SPEED R56 Installation Manual preview
R56
Brand: M7 SPEED Pages: 11
Wagan Road Ready Seat Protector User Manual preview
Road Ready Seat Protector
Brand: Wagan Pages: 12
Chevrolet 2016 Suburban Owner'S Manual preview
2016 Suburban
Brand: Chevrolet Pages: 50
Maserati Gransport Owner'S Manual preview
Gransport
Brand: Maserati Pages: 210
OnStar liveon Owner'S Manual preview
liveon
Brand: OnStar Pages: 22
AA Products SR-A260 Instruction Manual preview
SR-A260
Brand: AA Products Pages: 4
Lit Lightz RGBW Rock Lights Setup Manual preview
RGBW Rock Lights
Brand: Lit Lightz Pages: 3
Cadillac 54-6219 1954 Shop Manual preview
54-6219 1954
Brand: Cadillac Pages: 409
Fortin THAR-AUD1 Manual preview
THAR-AUD1
Brand: Fortin Pages: 9
GMC TopKick 2007 Owner'S Manual preview
TopKick 2007
Brand: GMC Pages: 430
SNIPER V2 Inox Owner'S Manual preview
V2 Inox
Brand: SNIPER Pages: 2
Mitsubishi MOTORS PAJERO SPORT Manual preview
PAJERO SPORT
Brand: Mitsubishi MOTORS Pages: 416
Whispbar K835W Fitting Instructions For Basic Carrier preview
K835W
Brand: Whispbar Pages: 63
Lexus LS 460 2011 Owner'S Manual preview
LS 460 2011
Brand: Lexus Pages: 830
Westin 33-1920 Instructions preview
33-1920
Brand: Westin Pages: 3
Tuff Tonneaus Bunji Ute Installation Instructions preview
Bunji Ute
Brand: Tuff Tonneaus Pages: 4

Brands by name

Popular brands

Load more brands