Fiat Ulysse, Owner'S Handbook Manual

Page: 49 / 254

GETTING TO KNOW YOUR CAR
48
Mount the child re-
straint system only with
the car stationary. The
Isofix child restraint system is
properly anchored to the mount-
ing brackets when clicks are
heard. In any case, keep to the in-
stallation instructions that must
be provided by the child restraint
system’s Manufacturer.
The Kiddy Type Isofix seat can how-
ever be fitted to the front passenger
seat even if not provided with Isofix
mounts: in this case, the child’s seat
must be fastened by means of the
three-anchoring point seat belt both
in the ahead and backward positions
The Type Isofix child’s seat covers
three weight groups: 0 , 0+ and 1 .
Fitting the seat for the 0
and 0+ group fig. 71
For children included in groups 0 and
0+ , the restraint system faces back
(for children with weight up to 13 kg)
and the child is held by the restraint
system belts
D .
Proceed as follows to fit the child re-
straint system in the correct way:
– the release lever B must be at rest
position (inward);
– find the presetting brackets A , then
position the child restraint system with
the fastening devices
C aligned with
the brackets;
– push the child restraint system un-
til hearing the locking clicks;
– check proper locking by moving
the child’s seat with force: the built-
in safety mechanism actually inhibit im-
proper coupling with only one cou-
pling locked.
fig. 71
F0B0237b
The Kiddy Isofix seat
shall not be fitted on third
row rear side seats.