Fiat Ulysse Owner'S Handbook Manual Download Page 101

Page: 101 / 254

GETTING TO KNOW YOUR CAR

100

TOGGLES fig. 130

Interior fittings include also toggles

. Rear toggles are fitted with clothes

hooks

WINDOW SHADES
fig. 131

(for versions/markets, where provided)

Window shades are sliding devices

fitted with reels and relative springs.
To use them fasten them to the upper
retainers

Do not pull the curtains downward

before having actually released the fas-
teners to prevent damage.

LUGGAGE RETAINING NET
fig. 132-133

(for versions/markets, where provided)

It is placed behind the second row

seats and can be secured to the fas-
teners on the floors as illustrated in

fig. 132

, or positioned as a “ham-

mock” fastened on the side as illus-
trated in

fig. 133

ELASTIC BANDS
fig. 134

(for versions/markets, where provided)

Front seats are fitted with elastic

bands

to hold small objects (e.g.

shopping bag).

Fasten them to their housing on the

seats as illustrated in the figure.

fig. 130

F0B0085b

fig. 131

F0B0036b

fig. 132

F0B0108b

fig. 134

F0B0018b

fig. 133

F0B0289b

Summary of Contents for Ulysse































































































































































































































































Search results

Summary of Contents for Ulysse

Reviews:

Related manuals for Ulysse

Brands by name

Popular brands

Fiat Ulysse, Owner'S Handbook Manual

Search results

Summary of Contents for Ulysse

Reviews:

Related manuals for Ulysse

Brands by name

Popular brands