Fiat Ulysse, Owner'S Handbook Manual

Page: 27 / 254

GETTING TO KNOW YOUR CAR
26
FRONT SWIVEL SEATS
fig. 28-29-30
(for versions/markets, where provided)
The front seats (driver and passen-
ger) can be turned through 180° to
create a “front parlour” effect.
To do this from outside the vehicle,
proceed as follows:
– put the seat back in vertical posi-
tion;
– take the seat “almost completely
forwards”;
– driver’s seat: lift the seat up to the
highest position and adjust the steer-
ing wheel “completely forwards”. The
seats cannot be turned 180° if the
handbrake lever is up. In this case, pull
button
B outwards and lower the
lever. The brakes of the vehicle are still
on in this position;
– lift the release lever A and, at the
same time, turn the seat 180° inwards
until the “parlour” effect is reached;
the system makes it possible to re-
leased lever
A during the seat rota-
tion.
Reverse the above mentioned pro-
cedure to put the seat back in driving
position.
Before starting off again,
make sure that the seats
are facing the front of the
vehicle and are properly fastened
to their anchorage points. The
seat belts can only be used effec-
tively in this position.
fig. 29 - Electric control versions
F0B0223b
fig. 28 - Mechanic control versions
F0B0290b
fig. 30
F0B0224b