Fiat Ulysse Owner'S Handbook Manual Download Page 105

Page: 105 / 254

GETTING TO KNOW YOUR CAR

104

Puddle lights fig. 142

(for versions/markets, where provided)

Light

placed on the front doors

comes on when the relative door is
opened, regardless of the ignition key
position.

Luggage compartment lights
fig. 143

When the tailgate is opened, lights

placed on the luggage compartment
side coating come on (one or two
lights according to the model).

When the tailgate is closed, the lights

go out automatically.

IMPORTANT

The lights go out au-

tomatically after a couple of seconds,
even if the tailgate remains open, to
maintain the battery charge.

ELECTRICAL SOCKET

(for versions/markets, where provided)

It only works when the ignition key

is at

and it is housed on the third

row right panel.

To use it lift the relative protective

cap.

fig. 142

F0B0259b

fig. 143

F0B0079b

Summary of Contents for Ulysse































































































































































































































































Search results

Summary of Contents for Ulysse

Reviews:

Related manuals for Ulysse

Brands by name

Popular brands

Fiat Ulysse, Owner'S Handbook Manual

Search results

Summary of Contents for Ulysse

Reviews:

Related manuals for Ulysse

Brands by name

Popular brands