Festo EMCS-ST Operating Instructions Manual Download Page 3

Page: 3 / 86

Festo — EMCS-ST — 2020-04a

About this document................................................................................................... 6

1.1

Applicable documents.................................................................................................. 6

1.2

Product version............................................................................................................ 6

1.3

Product labelling.......................................................................................................... 7

1.4

Specified standards...................................................................................................... 7

Safety........................................................................................................................... 8

2.1

Safety instructions........................................................................................................ 8

2.2

Intended use................................................................................................................ 8

2.2.1

Application areas.................................................................................................... 8

2.3

Training of qualified personnel..................................................................................... 8

2.4

Approvals and certifications......................................................................................... 8

Additional information................................................................................................ 8

Service..........................................................................................................................9

Product overview......................................................................................................... 9

5.1

Function....................................................................................................................... 9

5.2

Scope of delivery.......................................................................................................... 9

5.3

System overview.......................................................................................................... 10

5.4

Product design............................................................................................................. 11

Display and operating components (HMI).................................................................. 12

6.1

Overview...................................................................................................................... 12

6.2

Master control.............................................................................................................. 12

6.3

HMI menu..................................................................................................................... 13

Transport and storage................................................................................................. 15

Assembly..................................................................................................................... 15

8.1

Safety............................................................................................................................ 15

8.2

Mounting distances...................................................................................................... 15

8.3

Installation................................................................................................................... 15

Installation.................................................................................................................. 16

9.1

Safety............................................................................................................................ 16

9.2

Information on EMC-compliant installation................................................................... 16

9.3

Functional earth (FE) and protective earth (PE) connection........................................... 17

9.4

Connection variants...................................................................................................... 17

9.4.1

Wiring diagram: DIO operation (digital I/O)............................................................ 18

9.4.2

Wiring diagram: IO-Link operation, port class A (with and without NEFC
adapter)

.. 18

9.5

Electrical interfaces...................................................................................................... 20

9.5.1

Connection [Logic]: digital inputs/outputs (DIO), logic power supply.....................21

9.5.2

Connection [Logic]: IO-Link (LK), port class A..........................................................22

9.5.3

Connection [Power]: load voltage supply................................................................ 23

Commissioning............................................................................................................ 24

Table of contents

Summary of Contents for EMCS-ST






















































































Search results

Summary of Contents for EMCS-ST

Reviews:

Brands by name

Popular brands

Festo EMCS-ST, Operating Instructions Manual

Search results

Summary of Contents for EMCS-ST

Reviews:

Brands by name

Popular brands