Festo EMCS-ST, Operating Instructions Manual

Page: 15 / 86

7 Transport and storage
Transport and storage conditions
– Store and transport the product in its original packaging.
– Store product in a cool, dry, shaded and corrosion protected environment.
– Store product in ambient conditions without oils, greases and degreasing vapours.
– Ensure short storage times.
8 Assembly
8.1 Safety
WARNING!
Risk of injury due to unexpected movement of components.
The drive can move freely in the voltage-free state. This can cause unexpected movements of the con-
nected mechanics and crush parts of the body.
•
Bring moving parts of the mechanical system into a safe position.
8.2 Mounting distances
Drive systems with integrated drive EMCS-ST can be connected in series. When connecting drive sys-
tems in series, a minimum distance must be maintained to allow the heat generated during operation
to dissipate by allowing sufficient air flow.
•
Maintain a minimum lateral distance of at least 20 mm between the integrated drive EMCS-ST and
adjacent components.
Assembly instructions
– Mount the drive system flat on a sufficiently stable mounting surface.
– Maintain minimum distances and installation space to guarantee sufficient air flow. The ambient
air must be able to flow unhindered around the integrated drive EMCS-ST.
– Take into account the clearance required for connecting the cables (the cables at the [Logic] and
[Power] connections can be routed upwards (straight) or laterally (angled)).
– Do not install any temperature-sensitive components near the integrated drive EMCS-ST. The
integrated drive EMCS-ST can become very hot during operation.
8.3 Installation
• Mount the product
è
Instruction manual, mounting the corresponding drive.
Transport and storage
15 Festo — EMCS-ST — 2020-04a