Festo CTEU-DN Description, Functions And Maintenance Download Page 26

Page: 26 / 130

2. Installation and interfaces

2-4

Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH

Note

The bus node includes electrostatically sensitive devices.

•

Do not touch any electrical or electronic components.

•

Observe the handling specifications for electrostatically
sensitive devices.

They will help you avoid damage to the electronics.

Note

Use protective caps to seal unused connections. This is
how you achieve protection class IP65/IP67.

2.1.2

Mounting the bus node

A valve terminal with I-port interface or an electrical connec-
tion box, type

CAPC-...,

is required to mount the bus node.

Note

Information on mounting the bus node on the electrical
connection box type

CAPC-...

can be found in the assembly

instructions that accompany the connection box.
For H-rail mounting, you also need the mounting kit

CAFM-...

(CAPC and CAFM).

1. Inspect the seals and sealing surfaces on bus node and

valve terminal.

Summary of Contents for CTEU-DN



































































































































Search results

Summary of Contents for CTEU-DN

Reviews:

Related manuals for CTEU-DN

Brands by name

Popular brands

Festo CTEU-DN, Description, Functions And Maintenance

Search results

Summary of Contents for CTEU-DN

Reviews:

Related manuals for CTEU-DN

Brands by name

Popular brands