Festo CTEU-DN, Description, Functions And Maintenance

Page: 61 / 130

4. Commissioning
4-5
Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH
4.2 Network configuration and bus node parameterisation
Note
This section describes the startup procedure with an Allen-
Bradley-Scanner 1756-DNB (Revision 4.005) and Rockwell
RSNetWorx-Software for DeviceNet, Version 10.00.00
(CPR 9 SR 2).
The fundamental aspects of this description also apply for
other control systems.
4.2.1 Insert the participant in the project/network
1. Install the EDS file: Use the EDS Wizard in RSNetWorx,
which guides you through the installation process.
– Download: Section 3.2.4
– Installation: RSNetWorx EDS Wizard
Once the EDS file has been installed, the CTEU-DN parti-
cipant will appear in the hardware directory of the user
interface (“hardware” list)
1
in Fig. 4/1.
2. Drag the CTEU-DN participant with the mouse into the
network display on the right-hand side of the user inter-
face
2
in Fig. 4/1.