Festo CTEU-DN, Description, Functions And Maintenance, Page: 47 / 130

3. Preparing for commissioning
3-3
Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH
3.1 Preparing to commissioning a PLC
The following sections contain fundamental instructions on
commissioning the bus node on the DeviceNet.
Detailed instructions and further information can be found in
the documentation or online help for the controller or control
program.
3.1.1 General instructions
Note
– Bus node CTEU-DN can be used on all DeviceNet control-
lers.
– This chapter describes the configuration and
commissioning procedure using the example of
Rockwell/Allen-Bradley controllers (PLC) via the
RSNetWorx and RSLogix software platform.
– Higher-order controller (PLC) is also called DeviceNet
Master or Host System.
– The DeviceNet fieldbus system is referred to below as
network.