Festo CTEU-DN, Description, Functions And Maintenance, Page: 10 / 130

Contents and general safety instructions
VIII
Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH
Through the use of PELV circuits, protection against electric
shock (protection against direct and indirect contact) is en-
sured in accordance with IEC/EN 60204-1.
Range of application and certifications
The product fulfils the requirements of EU directives and is
marked with the CE marking.
Standards and test values which the product must comply
with and fulfil can be found in the section “Technical ap-
pendix”. The product-relevant EU directives can be found in
the declaration of conformity.
Certificates and declarations of conformity for this product
can be found online at:
www.festo.com
Information on DeviceNet can be found online at:
www.odva.org
The bus node has been certified by the Open Device Vendor
Association (ODVA):
Target group
This description is intended exclusively for technicians
trained in control and automation technology, who have
experience in installation, commissioning, programming and
diagnostics of programmable logic controllers (PLC) and
fieldbus systems.