Festo CTEU-DN, Description, Functions And Maintenance

Page: 104 / 130

A. Technical appendix
A-6
Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH
A.1.2 Power supply
Power supply
Operating voltage (reverse polarity protected)
for bus nodes and connected I-port devices
1)
– Nominal value
– Tolerance range DC 24 V ± 25 %
DC 18 …30 V
Load voltage (reverse polarity protected) for
connected I-port devices
1)
– Maximum value
– Typical tolerance range
(device-dependent)
2)
max. DC 30 V
DC 18 …30 V
2)
Voltage supply to the bus (fieldbus interface,
reverse polarity protected)
– Tolerance range
– Current consumption, interface electronics DC 11 …30 V
max. 50 mA
Bus node own-current consumption
from operating voltage supply for electronics/
sensors (U
EL/SEN
)
max. 65 mA at 24 V
(internal electronics)
Load capacity of the operating and load voltage
supply
1) 3)
– Bus node on I-port device (e.g. valve terminal)
– Bus node on electrical connection box, type
CAPC-...
max. 4 A
max. 2 A per connection (X
1
/ X
2
)
Mains buffering time
10 ms
1)
Separate, external fuses are required for operating and load voltage supply
2)
Dependent on the connected I-port devices (e.g. valve terminal)
3)
Load capacity for the connected I-port devices, e.g. the valve terminal, including the bus node
Tab. A/4: Power supply