4
Commissioning
36
Festo – P.BE-CPX-CTEL-EN – 1601b – English
4.7
Commissioning with the operator unit (CPX-MMI)
The operator unit (CPX-MMI) offers convenient and extended functions for commissioning the CTEL
master module.
This section includes an overview of the specific commissioning functions for the CTEL master module
with the operator unit:
–
General information on representation
(
è
4.7.1 Menu commands of the CTEL master module on the operator unit (CPX-MMI))
–
Display of signal statuses (
è
4.7.2 Observe signal statuses (monitoring))
–
Parameterisation (
è
4.7.3 Parameterisation with the operator unit (CPX-MMI))
General information about the operator unit (CPX-MMI) and commissioning the CPX
terminal can be found in the description (
è
P.BE.CPX-MMI-1-...).
Warning
The connected actuator technology can move unexpectedly!
Modification of the signal statuses and parameters using the operator unit can trigger
dangerous movements of the connected actuator technology.
Make sure that nobody is in the positioning range of the connected actuators and be
very careful with parameterisation or manipulation of signal statuses.
Observe the notes on “Force”, “Idle mode” and “Fail safe” in the CPX system
description and in the description for the operator unit if the CPX bus node used
supports these parameterisation types.
Summary of Contents for CPX-CTEL-4-M12-5POL
Page 58: ......
