1
Safety and requirements for product use
6
Festo – P.BE-CPX-CTEL-EN – 1601b – English
1
Safety and requirements for product use
1.1
Safety
1.1.1
General safety information
Observe the general safety information in the corresponding chapters.
Specific safety regulations can be found immediately before the task instructions.
Note
Damage to the product from incorrect handling.
Switch off power supplies prior to any assembly or installation work. Only switch on
the power supply when the product has been assembled and installation work is
complete.
Never unplug or plug in a product when powered!
Observe the handling specifications for electrostatically sensitive devices.
1.1.2
Intended use
The module provides 4 external I-Port interfaces, each of which can be connected to a device with an
I-Port interface (
è
The individual I-Port devices are documented in specific descriptions. The safety instructions specified
in these descriptions must be observed and the respective device must only be used as intended.
The module described in this document has been designed exclusively for use in combination with CPX
terminals from Festo. The CPX terminal and its connected modules are intended for installation in ma
chines and/or automated systems and may be used only as follows:
–
In perfect technical condition
–
in original status without unauthorised modifications, except for the adaptations described in this
documentation.
Summary of Contents for CPX-CTEL-4-M12-5POL
Page 58: ......
