Festo CPV -VI Series, Manual

Page: 104 / 118

5.6 Converting the CPV valve terminal to different electrical
connections
Due to the modular structure of the CPV valve terminal,
you can convert it to IC, MP, AS-i or CP connections.
PLEASE NOTE
With this conversion you should observe:
– the instructions for fitting the CPV valve terminal
with "F valve plates" (Ident. Code F). See section
"Valve plates" under "Description of components"
in the chapter "System summary."
– that only a CPV valve terminal with a CP
connection may be fitted with relay plates.
Proceed as follows:
CPV valve terminals with IC connection
••
Loosen the locking screws on the connecting
sockets.
••
Pull the socket carefully away from the connecting
lugs on the pilot solenoid coil.
••
Insert the MP, AS-i or CP connection onto the con-
necting lugs of the pilot solenoid coils.
••
Fasten the connector plate with the 4 socket head
screws. Tighten the screws in a diagonally opposite
sequence.
5. Maintenance and conversion
5-22
CPV... 9811d